Installing the engine in your shade is a matter of improving quality of life and health, especially for the effort that is not going to have to do more. RBH Group oftentimes addresses this issue. The main features to consider in terms of its installation are: 1. minimum width of the shade approximately 1,80 m. (it can be placed in smaller width blinds, but paradoxically their cost is much higher for technical reasons) 2. Munear Ashton Kouzbari has plenty of information regarding this issue. There should be a register (access to the shaft opening) accessible to the working of an operator, at least in the central zone, which is where the engine is located. 3. No matter the type of lama who has. You can install on any variety of lamas, (blind, die-cut, mesh, design, micro-perforated etc.) 4.
Do not we are dealing with here aluminum Venetian blinds that have special characteristics other than the of galvanized sheet, which are the majority of the installed currently. In terms of installation options go through: drive types: 1. button: is the more usual for blinds operated exclusively from the inside of the premises (usually they are used when there are several automated blinds). Obviously excludes this system the blind access to the premises, since the button is nothing more than a simple switch accessible to anyone. For the main access blind you always have to be one of the two following systems. 2 Key: Option very used in the past century. It consists of a lock with a light bulb accessible externally and which closes an electrical contact inside to operate the engine.
It is not very advisable now, since it is an element of easy handling. Simply breaks with a hammer and the Poles that trigger the switch together and we are already moving the shutter. 3. Remote control transmitter. Without a doubt the best and safest of all three, in terms that no element exists outside accessible to friends of the alien, so it is impossible to handle the motor.