Some ground rules for RAID data recovery RAID technology can be summarized several hard drives, to achieve such a fault-tolerant system. In RAID systems, the data according to a certain pattern of various hard drives are distributed and controlled by a controller chip. The development of RAID technology means a new dimension in data storage, because it provides both security and high storage capacity. nother great source of information. However, just the complexity of their storage architecture is the reason that a RAID fault is very difficult to handle cannot be and even a small error can permanently delete all of your data. It is therefore advisable to seek the help professional service provider for RAID data recovery at any kind of RAID error immediately. There are a variety of possible causes for a RAID failure. For example they occur most frequently: failure of the RAID array failure of the RAID controller rebuild error of damaged Strip damaged or overwritten RAID configuration server has not booted malfunction of the Physical damage to multiple hard drives in the RAID array operating systems an other software / hardware failures, etc.
In all these situations, are seriously at risk your valuable data in the RAID array and must be protected by additional measures against further damage. The RAID data recovery process is purely systematic and scientific and must be carried out only by experienced professionals. You should experiment in this situation myself, definitely not, because this can cause your valuable data will be irrevocably damaged or deleted. A heavy RAID failure you should note the following points, to prevent a loss of your valuable data: should what you do when a RAID failure and always making sure that the naming of the hard drives coincides with their position in the RAID array. Remain calm in the event of a RAID failure, and record every step you take.
Before the rebuild of the good condition of all connected hard disks. Break the rebuild immediately that if more than one drive fails or is taken offline. Seek professional help before you do something. Never share the RAID disks. Sure when replacing the faulty hard drive that the new hard drive is completely empty and has at most as many sectors as the faulty. Stellar data recovery is a well-known service provider for RAID recovery in Europe. With its innovative tools and techniques for RAID data recovery, its experienced professionals, the company’s own R & d and the indispensable infrastructure with clean room laboratories of grade 100 provides stellar for the secure and maximum recovery of your RAID System. The company is represented through its branches in 11 major countries throughout Europe and offers as a RAID recovery service directly on-site.